[ipv6-tf] testy (publicznego) Teredo serwera w PCSS
Bartek Gajda
gajda w man.poznan.pl
Śro, 9 Lut 2005, 22:02:22 CET
przesylam jeszcze w zalaczniku konfiguracje klienta mirado dla linuxa
(czesc wpisow dotyczacych serwera usunalem).
Calosc konfiguracji jest zawarta w pliku przykladowym wraz z instalacja.
W konfiguracji nalezy jeszcze wpisac swoj adres IPv4
Bartek
-------------- następna część ---------
#
# Sample configuration file for Miredo
# by Remi Denis-Courmont
# $Id$
#
#
# GENERAL PARAMETERS
#
# - client,
# - cone,
# - restricted,
# - disabled.
#
# "client" will run Miredo as a Teredo client. Use this if you have no
# IPv6 connectivity and wish to use Miredo to tunnel IPv6 over UDP/IPV4
# through a NAT device.
#
# If you don't want to run a Teredo relay, use "disabled".
#
# Defaults: RelayType client
# Examples: RelayType restricted
# RelayType cone
#
RelayType client
#
# Name of the networking interface
# (ignored on non-Linux systems)
# Defaults: InterfaceName miredo
# Example: InterfaceName teredo
#
InterfaceName teredo
#
# CLIENT & RELAY PARAMETERS
#
#
# IPv4 address to bind to (may be private)
# Defaults: BindAddress 0.0.0.0
# Example: BindAddress 138.195.152.236
#
BindAddress _twoj_adres_IPv4
#
# Teredo service (UDP/IPv4) port to bind to
# Defaults: automatic
# Example: BindPort 3544
#
BindPort 3545
#
# (Client-only)
# Server primary IPv4 address (possibly an hostname)
# If not set, Miredo will work as a Teredo relay rather than a
# Teredo client.
#
# Public Teredo servers:
# - teredo.ipv6.microsoft.com (defaults on Microsoft Windows)
# - teredo.ipv6.6wind.com (6wind ng_teredo testing server)
# - teredo.via.ecp.fr (Miredo testing server)
#
# Defaults: unset, serve as a Teredo relay instead.
# Example: ServerAddress teredo.ipv6.microsoft.com
#
ServerAddress 150.254.166.156
#
# (Client-only)
# Whether to create a default IPv6 route through the Teredo tunnel
#
# Defaults: DefaultRoute On
# Example: DefauktRoute Off
#
#DefaultRoute Off
Więcej informacji o liście ipv6-tf